Traditional auger fillers have their place in filling applications which call for the delivery of relatively large doses of dry powdered or granular products. However, they are inherently unsuitable for use in filling applications which call for the delivery of small incremental doses with close-tolerance repeat accuracy.Read more
Powder and Bulk Solids Instrumentation
- Accurately measuring dry bulk solids
- Process instrumentation
- Powder behavior
- Flow properties of a powder or a bulk solid
- Particle characterization in bulk powders
- Difficulties related to powder handling
- Sampling of powders and bulk materials
- Moisture measurement in powder and bulk solids
- Level measurement of powders and bulk solids
Accurately measuring dry bulk solids
Because dry bulk solids are such an essential part of many of the products around us, being able to accurately measure them is critical to the efficiency of their production.
To make processes more efficient, more cost-effective, and more reliable, you have to understand what is occurring within a process so that it can be optimized.
Ideally, that means measuring the input and output of each minor process in order to understand, for instance, the optimal setting for each piece of machinery, the best ratio for mixing ingredients, the best way of maximizing output while minimizing cost.
Process instrumentation is a range of measuring instruments to control and monitor an industrial process. ?Process instrumentation is used for the measurement and control of process variables within a laboratory, production, or manufacturing area.
A Process instrument is a device that measures a physical quantity such as flow, temperature, level, distance, angle, or pressure and generates a signal for process controls, within industrial manufacturing facilities.
Process instrumentation in dry bulk and powder handling operations
Process instrumentation is an integral part of any dry material handling/powder handling process because it allows real-time measurement and control of process variables such as levels, solids flow, pressure, temperature, dustiness, and humidity.
With the right process instrumentation, manufacturing facilities can run effectively, efficiently, economically and safely through the integration of alarm signals.
Powder behavior can affect manufacturing efficiency and can directly affect product quality variables such as dose uniformity.
It is now possible to measure reliably the properties of a powder and relate these directly to particle morphology.
Accurate, statistically relevant particle size and shape data have been generated using the technique of automated imaging and used to investigate the impact of particle morphology on dynamic, shear and bulk powder properties.
Powder flow can be defined as the ease with which a powder will flow under a specified set of conditions. Some of these conditions include:
- the pressure on the powder,
- the humidity of the air around the powder, and
- the equipment the powder is flowing through or from.
For some applications, ease of flow is simply defined by whether the powder flows or not, the so-called "go-no-go" approach. Will the powder flow through the system or not?
For other applications, the rate and consistency of the powder flow are important.
Bulk solids flow
The device used to test a bulk solids flow must take the application problems and processing conditions into account to supply relevant data to the user.?The powder in the test device must be in the same state as it is in the process being studied. This ensures that the flow analysis will be applicable to the problem.
Flow properties of a powder or a bulk solid
Knowledge of the flow properties of a powder or a bulk solid is crucial to design silos and other bulk handling equipment, to ensure that flow problems won’t occur.
The flow properties depend on several parameters, for example:
- particle size distribution,
- particle shape,
- chemical composition of the particles,
Why test a bulk material’s flow properties?
A full understanding of a bulk material’s flow properties and its flowability are essential for identifying the cause of poor flow, powder flooding or rate limitations, segregation, or product non-uniformity.? Flow properties tests are also crucial when designing a new silo/bin/hopper, stockpile, feeder, chute, conveyor or other bulk material handling equipment.
Powder and bulk solids properties
Understanding the powder/bulk solids properties is the first step to a good design, or efficient troubleshooting, of an industrial installation.
The design and operation of particle and powder handling and processing equipment requires specific knowledge of particle properties and bulk properties of powders.
Particle characterization in bulk powders
Particle characterization is the process of identifying various particles by particle shape, size, surface properties, charge properties, mechanical properties, and microstructure.
There is a variety of commercially available particle characterization techniques that can be used to measure particulate samples.
Each has its strengths and limitations and there is no universally applicable technique for all samples and all situations.
Particle size – The particle size directly affects compaction, flow, dissolution, texture. Control of the particle size can be required for a specific final application, or for controlling the input for further processing. Measuring the particle size is particularly important for comminution/size reduction processes.
Particle shape – Particle shape is the expression of the external morphology of the powder particle and it includes form (overall shape), roundness (smoothness) and surface texture.
Control of the shape of the particles can be required for the needs of a specific final application. Knowing the shape of the particles can also help anticipate mixing problems.
A major problem in testing the influence of particle shape on powder properties is the separation of different particle shapes in one powder bulk. There is as yet no universal method to describe the shape of powder particles.
Particle strength – Particle strength depends on a variety of factors such as their material and mechanical properties, their size, shape, the loading pattern, and other external conditions. Impact tests, Attrition tests, and compression tests allow good determination of the strength distribution of impact and compression strength.
Bulk density – Bulk density is a property of powder, granules, and other bulk solids. is defined as the mass of many particles of the material divided by the total volume they occupy. The total volume includes particle volume, inter-particle void volume, and internal pore volume.
Particle density – Particle density (or true density) is the weight per unit volume of a solid. Particle density will be relevant when the movement of the solid must not anymore be considered as a mass but as an individual. It is the case for some technologies of pneumatic transport.
Particle dustiness – Dustiness is the tendency of particles to become airborne in response to a mechanical treatment or aerodynamic stimulus. Dustiness is affected by the particle shape, size, and inherent electrostatic forces. Particularly in processes that work with powders, granular materials or fibers, dust particles can be released into the air during conveying and transport.
Particle concentration - Particle concentration measurement is a requirement across a diverse range of industrial processes. In many cases knowing only the particle size is not enough, as sample concentration may also affect the performance of the product.
Difficulties related to powder handling
To ensure reliable handling and processing of bulk materials, equipment and system designs must be based on proper material characteristics measured at representative process conditions.? Different powders and manufacturing processes can present an array of powder handling problems, for example:
Segregation of powders
In powder technology segregation means separation of particles of different properties during handling, transportation and storage, and it is a common problem for most industries processing particulate solids.
Degradation occurs as the product is being moved through the system and the particles are constantly in contact. Therefore, the material breaks down which can result in a poor-quality product but can also cause problems with dust containment.
Powder caking results when particles agglomerate and form solid lumps or masses.? Caking is undesirable and results in customer complaints, rejected products, and additional processing steps needed to delump the material.
Bridging of powders
Bridging of powders takes place when bulk materials interlock or bond together to build an arch (or bridge) above the outlet of a container (silo, hopper, IBC, mixer vessel). When this occurs, the arch holds the rest of the bin's contents preventing discharge of the remaining powder. To overcome bridging the wall friction must be reduced or prevented from occurring.
Ratholing of powders can occur in a container (silo, hopper, IBC, mixer vessel) when the powder empties through a central flow channel, but the material at the bin walls remains stagnant and leaves an empty hole (rathole) through the material, starting at the bin outlet.
Samplers/sampling equipment for powders and bulk materials
Sampling can be defined as the taking of samples from a material in order to obtain information about the composition of the total amount in respect of one or more attributes, such as metal content, ash content, moisture, particle size, particle shape, etc.
Particle size analytical results are most applicable when drawn samples are representative and the appropriate dispersion techniques are used.
The majority of variation in particle sizing measurements is traceable to either incorrect sampling or sample preparation.
Sampling challenges with solids and powders
It’s frequently said that handling dry materials is more of an art than a science. Bulk solids sampling is susceptible to conditions upstream and downstream of the area where the representative sample is drawn, chiefly due to material flow properties. Even a few degrees of moisture fluctuation, for example, can skew results.
Aeration is another hazard to flow properties. Some materials aerate well, so placing a sampler along a free-flowing stream presents no particular difficulties. However, those same materials may solidify as they settle. A sample taken after settling will return drastically different results than that drawn in the process stream.
Another challenge that is often not considered is space limitations on the process line. Samplers vary in size and footprint based on application, so installation can be tricky if sampling goals and the equipment needed to accomplish them are not carefully examined and aligned.
Moisture measurement in powder and bulk solids
Moisture measurement is an essential aspect of manufacturing from the initial process to the end-product stage.
Measuring and controlling moisture can reduce transportation costs due to shipping excess water, and moisture control stops products from freezing during shipping and transportation.
Moisture content measurement throughout the manufacturing process also provides cost savings in energy & fuel costs, as well as having less product waste.
When one measurement is out of tolerance, a quick automatic or manual adjustment can be made to keep bulk materials moving correctly before costly time is lost, and waste is produced.
Level measurement of powders and bulk solids
Level measurement of powders and bulk solids in bins, silos and other types of vessels comes with significant challenges.
These challenges include:
The shape of the material surface - The solids being measured can be in the form of either minute size powders or outsized having pointed edges
Material characteristics - Bulk solids can be fine micron size powders or large with sharp edges.
The angle of repose of solids - Unlike all virtual liquids, the bulk solids contained in a vessel do not possess a plane horizontal surface. They generally have an angular surface shape known as the angle of repose which can change according to the fill and discharge settings.
Vessel dimensions - It can be difficult to know the exact dimensions of the silo the bulk material is stored within.
Bulk density differences - It may be difficult to know an accurate value for the bulk density for materials like corn and flour that vary from season to season and are dependent on specific crop and blend.
Dust inside the vessel - Some materials tend to generate huge quantities of dust while filling and expulsion.
Some of these challenges deal with converting a distance or level measurement to volume or weight. Others challenge the reliability of the level measurement technology chosen.
The major selection criterion with all bulk solids level measurement systems is the condition of the material within the vessel and its effect in terms of accuracy on level measurement and sensor contamination.
Articles related to powder and bulk solids instrumentation
Powder characterization is becoming one of the key parameters in many industrial processes.Read more
Subscribe to our E-顺心彩票letters
New eBook from Freeman Technology Addresses the Critical Issue of Powder Flow Testing for Additive Manufacturing
Freeman Technology, a Micromeritics company and the global leader in powder characterization technology, has released a new eBook focusing on the application of powder flow testing in Additive Manufacturing (AM).Read more
Select from three different types of housings. Although the metal-jacketed is the most popular, a compact 1-1/2” NPT housing may be an easier option to install on an existing fitting and is perfectly suited to bins up to 98 feet tall.Read more
The CentriFeeder MCV is a gravimetric weigh feeder that integrates the mass flow measurement capabilities of a solids flow meter, with the flow control capabilities of an integrated slide gate.Read more